LED CHAMELEON STARCLOTH

The ShowLED Chameleon system is the RGB LED Starcloth system.

It offers the same features and easy programming options as ShowLED Classic, but in any given colour(s). In addition, by following the menu structure on the LCD display, the controller can be programmed at a glance: colour changes, twinkling effects, chases,…

Furthermore, the starcloths can also be controlled from a lighting desk. ShowLED Chameleon provides 8 DMX output channels with a maximum of 512 LEDs per controller. Given the standard density of around 5.5 high output LEDs per sqm (randomly placed), one controller can run a starcloth of up to 100 sqm. More controllers can easily be linked in master-slave configurations so that more panels act as one big curtain.

output channels for driving RGB LEDs
Stand-alone mode with Chase Patterns and Effects Memory
Chase patterns
Stand alone (or selected by DMX signal)
Selection hard or soft chase
Variable chase speed
A number of predefined patterns
Interactive colour selecting
DMX-compatible
The DMX signal is cleaned up and amplified every time it passes through a controller.
2 separate DMX modes
preset chasers (via 10 DMX channels)
individual control 8 RGB output channels (via minimum 24 DMX channels)
Two or more controllers can be synchronized
The LED outputs are protected against short circuit
Uses standard cables (4 or 5 pin XLR-cables, IEC power cord)
Maximum 512 LEDs per controller
Maximum 256 LEDs per XLR plug (4x 4-pin plug per controller) via connector box
4-line LCD display (20 characters per line)
Master-slave configuration