The Jands HUB 24 incorporates a 15 channel dimmer rack, 9 way power distribution unit and a 2 way opto-isolator into one compact, virtually silent unit. Designed for live shows, school auditoriums, trade shows and other similar applications, the HUB 24 streamlines lighting system storage, transportation and setup.
The HUB 24 is the ideal choice for anyone using a mixture of conventional and automated lighting fixtures and offers a host of powerful control options such as a stand-alone mode for use without a control desk and a software selectable current limiting device that allows the unit to be safely operated from a 32A, 50A or 63A supply. The HUB 24 uses a chokeless IGBT output topology for reduced weight and noise.
Features
15 x 2.4kW dimmer channels
3 x 4.8kW non-dimmed circuits (3 outlets per circuit—9 outlets total)
Separate RCD protection for dimmer and power distribution sections
Current monitoring/control facility
DMX in, thru, plus two opto-isolated DMX outputs, all fault protected to 240VAC.
Microprocessor control with 128x64 pixel graphics LCD
Easy to use menu driven user interface
Front panel ‘Select’ and ‘Cancel’ buttons, and encoder wheel for function/level select
Storage for 8 (eight) DMX snapshots and 8 chases
Inbuilt self tests and error logging
Software downloadable from a PC or laptop
Software selectable DMX termination
14.8 bit firing resolution
IGBT output drive
Low acoustic noise operation
Dimmer wakes up in previously selected mode
Stand alone operation
Four selectable fade curves (two user definable)
50 or 60Hz operation
Neutral failure detect
DMX start address on any channel
DMX cross patch
Wall or bar mountable (option kit required)
CE & C-Tick approved
Technical Specifications
Power supply type - 3 phase star (neutral required) with earth
Power requirements - Nominal 240V +10/-20% phase to neutral 45-66Hz
Supply protection - 50A max
Dimensions - 432mm(W) 295mm(D) 445mm(H)
Net/Shipping Weight - 28/32kg
Dimmer Channels - 15
Power Rating - 2.4kW per channel
Linear/switched/user definable x 2
Max ambient temp - 40°C for 100% duty cycle
Dissipation - < 1% of output load
Output connectors - Australian 3 pin 10A sockets
Control Input - USITT DMX512/1990 5-Pin AXR
Isolated DMX output - USITT DMX512/1990 5-Pin AXR
Mains tone rejection - 15VRMS @ 750Hz
Output rise time - 100µs
Output protection - 10A thermal magnetic circuit breakers plus overall RCD
Output Channels - 9 sockets on 3 circuits
Output Sockets - 2 x Aust. 10A & 1 x Aust. 15A per 20A circuit breaker
Power Rating - 4.8kW per circuit
Output protection - 20A thermal magnetic circuit breakers plus overall RCD
