The Power-Tiny is the new battery-operated fog generator from Look Solutions. It completes the range of the off-mains operated machines (Tiny-Fogger and Tiny Compact) perfectly and fills the gap between high flexibility and powerful fog output.

In the world of theatre, film, TV- and photographers, musicals and special effects, air flow and air tightness testing - everywhere where fog is needed quickly and efficiently, the Power-Tiny is the perfect alternative to normal fog generators.

Features
• Minimal heat-up time. Due to the heat-up time of only one second the Power-Tiny is ready-to-use on site.
• Light weight and small dimensions. The light weight (5.6 kg) and the small dimensions (L=22.3; W=10; H=21 cm) makes the machine useable for mobile uses.
• Adjustable output. The output of the Power-Tiny can be adjusted with an adjusting knob. The release button is built into the grip. Thus, a comfortable one-hand operation is possible.
• Microprocessor controlled. The heart of this machine is a microprocessor which controls and supervises all important functions. This guarantees a continuous and safe running of the generator.
• 250 hours stand-by time. Because of an intelligent control mechanism the battery supplies energy only when necessary. Thus the operation time is considerably increased - the stand-by time is 250 hours. With one battery 10 minutes of continuous output or up to 150 x 5 seconds bursts can be produced. When the battery is flat it has to be recharged with the supplied charger.
As an option a battery pack is available (battery complete with housing, PCB, fuses and plug). The fog generator can easily be disconnected from the battery and can be connected to the new battery quickly.
• Minimal fluid consumption. A special fluid ensures that dense fog is produced with the lowest of fluid consumption.
• Control. The Power-Tiny is equipped with a 3pin-XLR-socket for analogue (0 - 10V) control. An XLR-remote as well as a wireless radio remote can be connected (both as an option). With a DMX-converter (DMXit) the machine can be controlled via DMX 512. With the optional Timer (TIMEit) a fog and wait time can be programmed in.